![]() ![]() The control panel consists of three buttons on the side of the base, but there is an LED control panel on the top of the base that lets users see their temperature settings, puff counter, and heat-up time. Users input their settings with the two buttons and see the changes on the top. The rest of the base features the coil extension that accepts one of the three cups included in the kit. Users can easily switch between the cups as they simply lift out of the container. There is a USB port located on the base, which enables USB-C charging with the charging cable included in the kit. The Wuukah comes fully accessorized as it has several features and capabilities. The Wuukah comes in an elegant, lift-open box with all the important pieces like the bubbler sitting in felt cut-outs. 1 x Wuukah Electronic Rig Vaporizer Base.Here is what user can expect if they get the device. The build quality of the battery base is sturdy and solid. The buttons on the front work well and never get stuck. The LED lights on the top add a nice touch to the overall aesthetics of the rig, as they continue to illuminate even with the glass piece attached. Even though the bubbler sits atop it, user can still remove it during a session to make changes to the settings. The bubbler has a separate arm that slips over the atomizer container so the material is not touched. If user wanted to remove the glass piece, they could without any interruption to their vape session. The piece itself is also well-made, as it has thick walls with a medium-bore mouthpiece that lets users take a good amount of vapor from the device. The Wuukah is very straightforward and easy to set up. After it is charged, users can activate the battery by pressing the “Go” button on the front five times quickly. The LED control panel will then light up, which lets users input their preferred temperature - the highest temperature is 520F. Pressing and holding the two adjustment buttons changes the readings from Celsius to Fahrenheit if they so desire. The cups need to be press-fitted, but once they are in they stay securely in place.īefore they start the heat-up process, users should load one of the three cups (titanium, quartz, ceramic) included in the kit into the cup holder. With the cup loaded, users can then fill the bubbler with water but keep the water level below the prominent mark line on the glass section. They can then gently press-fit the glass piece on the main section and slip glass over the atomizer coil. Users then select their temperature and then start the heat-up process by pressing the “Go” button three times to start the preheating process. Once the LED panel lights up green, the device is ready to vape. The precision heating feature of the Wuukah is a big selling point, as other similar devices use only preset temperatures. With these features, users can experiment with heat settings and find their preferred level. The heat-up time takes only about twenty-thirty seconds so the heat-up time is fast as well. With the three different cups, users also have a lot of choices.Īll three materials (titanium, quartz, ceramic) are common among concentrates vaporizers with each having their distinctive qualities. Titanium nails heat-up very fast and hit very hard, as the surface gets hotter and produces a lot of vapor. The quartz and ceramic cups have other qualities. They both absorb heat and offer a smoother, more relaxed vaping experience. The fact that bubbler piece filters and cools down the vapor before inhalation is another plus. The LED control panel is also another positive aspect of the Wuukah.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |